Chipjet Tip | How to Replace Ink Cartridge?

Views: 6     Author: Site Editor     Publish Time: 2023-11-17      Origin: Site

Even though most people are aware that ink cartridges should be changed when they run out, many of you might not know how to put a new cartridge in. As a result, we have summarized relevant queries and written this article to help you.

 

Replace Black and Tri-color Ink Cartridges

Black and tri-color cartridges have an integrated printhead built into the cartridge. Before installation, you should remove the sealing tape which covers the vent hole first. Then slide the new cartridge at a slight upward angle into the slot and push the cartridge towards the rear until it snaps into place.

一体机墨盒安装的卡扣


Replace Individual Ink Cartridges

Individual ink cartridges do not have a built-in printhead.  Instead, the printhead is built into the printer.

分体式墨盒的安装

Take out the empty cartridge and install your new cartridge in the same slot. Press on the new cartridge to secure. You should hear a click after pressing on it.

推入式墨盒


Cartridge Maintenance

1. Do not unpack the cartridge if not needed. Keep the cartridge at the proper temperature which is specified on the box;

2. To avoid the cartridge drying out, put it back into the printer as soon as you can after taking it out.


Hope this guide will help you out the next time you have to install an ink cartridge. If you have any questions, please leave us a message. We'll respond to you as soon as possible.


(Pictures are taken from the Internet and will be taken down if copyright infringement occurs)

SUBSCRIBE

©2021 Chipjet cartridge chip manufacturer. All Rights Reserved
“All brandnames and trademarks are the properties of their respective owners and are used for identification purpose only.”
Leave a Message
Inquiry Now