Chipjet Tip | How to Check Cartridge Model and Install Cartridge

We use printers on a daily basis in our homes and at work these days. As a result, it's essential to understand how to check cartridge model and replace cartridges. To find out more, keep reading!

01 How to Check Cartridge Model

Confirm Printer Model

Typically, a printer model is made up of letters and numbers. You can easily find it on the printer’s body.

Check Cartridge Model

The simplest way is to check the cartridge's label. For example, the cartridge model in the picture below is 131A.

For other methods, please watch the following videos:

02 How to Install Cartridge

1. Prepare the replacement cartridge.

2. Open the cartridge door. Hold the middle handle of the toner cartridge and pull it along the tracks to remove it.

3. Remove the new toner cartridge from the bag. Remove the orange cover from the cartridge and then pull the tab straight out to remove the sealing tape.

4. Hold the middle handle of the new cartridge, align it with the tracks inside the printer, and slide it into the bottom until it clicks into place.

5. Close the front door.

Note:

Remember not to touch the imaging drum. Print quality issues could be caused by fingerprints.

Hope this article can help you confirm the cartridge model and replace cartridges. If you have any questions, leave us a message. We’ll be glad to help.

Pictures are taken from the Internet and will be taken down if copyright infringement occurs. All brandnames and trademarks are the properties of their respective owners and are used for identification purpose only.